store-and-forward mode or straight-forward mode,support requirements
Max Packet Length:
100 Piece/Pieces per Week
Packaging & Delivery
standard packing or do as customer's requirements
Shipped in 5 days after payment
10/100/1000M managed media converter snmp
Fiber optical media converter is the Ethernet transmission media conversion unit which interconverts the electric signals on twisted pair cable of short distance and optical signals of long distance. It is also called fiber to Ethernet converter. Fiber optical media converter generally uses at internet environment where Ethernet cable could not cover and have to use fiber optical cable to extend the transmission distance. Also it is located in internet access solution of MAN broadband.
Fiber optical media converter breaks the 100m distance limits of Ethernet electric cable, makes the internet coverage extending to 120KM effectively, bases on high performance dedicated chipset and cache of large capacity to provide non-blocking transmitting performances. In addition, it also provides the function of balancing flow, isolating the conflicts and dedicating errors to ensure the security and stability of data transmission.
MD1000 gigabit fiber optical media converter meets the operational requirement of telecom level. It is based on CLI,WEB and SNMP three managed ways providing comprehensive management of function, performance and alarm etc.
MD1000 head end is the card-inserted type and is installed in the chassis. Remote end is standalone or built-in power card-inserted type. Optical interfaces support single or duplex fibers for different kilometers and SFP slots.
MD100 fiber optical media converter meets the operational requirement of telecom level. It is based on CLI, WEB and SNMP three managed ways providing comprehensive management of function, performance and alarm etc.
MD100 head end is the cardi-nserted type and is installed in the chassis. Remote end is standalone or
built-in power card-inserted type. Optical interfaces support single or duplex fibers for different kilometers
and SFP slots.
MD-1000 optical fiber transceiver is card-inserted type products, which is installedin the MD-C16 frame, implemented in 100/1000Base-T (X) photoelectric conversion between the electrical signal and 1000Base-X SC fiber optical signal (SSC type), or to achieve media conversion between the two kinds of medium 1000Base-T twisted pair cable and SFP Gigabit fiber (SFP type). The product can be used for optical fiber network of long distance transmission, support the transmission rate of 1000M, to meet the requirements of the comprehensive management of telecom operation support, based on the local command line, WEB, SNMP centralized management in three ways, performance, alarm function.
v 1 10/100M adaptive Ethernet electric port, 1 fixed optical port or SFP slot.
v Ethernet Electricport supports 10Base-T, 100Base-TX and complies with IEEE802.3, IEEE802.3u and IEEE802.3z standard.
v Electric port supports cross and straight automatic negotiation.
v Head end is card-inserted type and installed in internet managed chassis. Remote end is standalone type or single slot chassis of card-inserted type.
v Support bandwidth control.
v Remote end support power detection.
One 10/100/1000Mauto-negotiation , RJ45;
Compliant with IEEE802.3, IEEE802.3u,IEEE802.3z
Up to 100m distance
Connector Type: One SC/PC or SFP
Wavelength 850nm/1310nm/1550nm optional
Transmission distance 2~100KM
Optical Linked status
remote media converter power on or off
LAN port are working under duplex mode
electric port connect with 100M
Linked on 1000Mbps
electric port loopback status
RDF function status
Status of the port
store-and-forward mode or straight-forward mode, you can set as your requirements
Max Packet Length
< 5us @64bytes, 28us@1518bytes
operating temperature range:Packet Loss in 72 hours:0%